Xigmatek Minotaur 1000W 80 PLUS GOLD Fully Modular Power Supply Unit – Flat Cable – 100~240V Full range – 120mm Sleeve Bearing Fan – 140mm Length – Black
$ 182
1000W 80 PLUS GOLD Fully Modular
Expert Features
80 PLUS Gold
- 80 PLUS Certificated, Achieve 90% Efficiency at 90% System Load.
Full modular cable
- Full Modular Cable Design. Use the Necessary Cable Needed to the Clean Build.
Flat Cable
- Easy & Tidy Cable Management.
100~240V Full range
- Cable to Work from 100V to 240V Environment.
Single +12V input
- Enhanced +12V Current Capability Broadens Utilization Possibilities.
Active Power Factor Correction
- Reduce Line Loss and Power Distortion.
DC to DC Convertor Design
- Provide Superior Dynamic Response, Great System Stability and Maximizes the 12V dc Rail Output.
LLC resonant Converter Design
- High Conversion Efficiency and Low Electromagnetic Interference.
120mm Sleeve Bearing Fan
- Provide Excellent Cooling Source and Longer Life Time.
Compact Size
- 140mm Length is an Ideal Choice for System Build from expert zone
Complete Protection
- OCP/UVP/OVP/SCP/OPP/OTP Protection. Safe and Reliable.
Multi GPU Support
- Multi-GPU Technologies Supported. 6-Pin PCI-E Connectors to Support all GPU Platforms.
Additional information
Additional information
| VEIKK , A50 , DRAWING , TABLET , 10 | {attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|
Related products
MSI GeForce RTX™ 4070 Ti SUPER 16G GDDR6X GAMING X SLIM WHITE ,WITH DLSS 3 , DisplayPort x 3 (v1.4a) , HDMI™ x 1 , TRI FROZR 3 Thermal Design / 912-V513-626
MSI RTX 4070 Ti SUPER WHITE
EXPERT FEATURES
WITH DLSS 3
- Get equipped for supercharged gaming and creating with NVIDIA® GeForce RTX™ 4070 Ti SUPER.
- It’s built with the ultra-efficient NVIDIA Ada Lovelace architecture.
- Experience super fast ray tracing, AI-accelerated performance with DLSS 3, new ways to create, and much more.
Boost Clock / Memory Speed
- 2670 MHz / 21 Gbps
- 16GB GDDR6X
- DisplayPort x 3 (v1.4a) HDMI™ x 1 (Supports 4K@120Hz HDR and 8K@60Hz HDR and Variable Refresh Rate (VRR) as specified in HDMI™ 2.1a)
TRI FROZR 3 Thermal Design
TORX Fan 5.0:
- Fan blades linked by ring arcs and a fan cowl work together to stabilize and maintain high-pressure airflow.
Copper Baseplate:
- Heat from the GPU and memory modules is captured by a copper baseplate.
Airflow Control:
- Sections of different heatsink fins disrupt unwanted airflow harmonics and reduce noise.
Afterburner
- Take full control with the most recognized and widely used graphics card overclocking software in the world.
MSI Center
- The exclusive MSI Center software lets you monitor, tweak and optimize MSI products in real-time.
- maximum cooling.
EXPERT SPECS
- Graphics Processing Unit: NVIDIA® GeForce RTX™ 4070 Ti SUPER
- Interface: PCI Express® Gen 4
- CUDA Cores: 8448 Units
- Core Clocks: Extreme Performance: 2685MHz (MSI Center) Boost: 2670 MHz
- Memory Speed: 21 Gbps
- Memory: 21 Gbps
- Memory Bus: 16GB GDDR6X
- Output: DisplayPort x 3 (v1.4a) HDMI™ x 1 (Supports 4K@120Hz HDR and 8K@60Hz HDR and Variable Refresh Rate (VRR) as specified in HDMI™ 2.1a)
- HDCP Support: Y
- Power Consumption: 285 W
- Power Connectors: 16-Pin W
- Recommended PSU: TBD
- Card Dimension (mm): 307 x 125 x 51 mm
- Weight (Card/Package): 1094g/1676g
- DirectX Version Support: 12 Ultimate
- OpenGL Version Support: 4.6
- Maximum Displays: 4
- G-SYNC Technology: Y
- Digital Maximum Resolution: 7680 x 4320
Kingston FURY Beast White 16GB 5600MT/s CL40 DDR5 XMP DIMM | Overclocking | Plug N Play | Intel XMP 3.0 | Single Module | KF556C40BW-16
Kingston FURY Beast White 16GB 5600MT DDR5
Expert Briefing
- Brand: Kingston
- Computer Memory Size : 16 GB
- RAM Memory Technology : DDR5
- Memory Speed : 5600 MT/s
- Special Feature : Lightweight
- Improved stability for overclocking
- Increased efficiency
- Intel XMP 3.0 Certified
Expert Description
- Kingston FURY KF556C40BW-16 is a 2G x 64-bit (16GB) DDR5-5600 CL40 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module.
- The module supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Each module has been tested to run at DDR5-5600 at a low latency timing of 40-40-40 at 1.25V.
- The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V.
- Each 288-pin DIMM uses gold contact fingers.
Cooler Master MasterCase H500P Mesh Black ARGB Case
Cooler Master MasterCase H500P Mesh ARGBMCM-H500P-MGNN-S11 Black PC Case with Dual 200mm Fans for High-Volume Airflow, Builder-Focused Chassis Panels, Liquid Cooling Ready
DUAL 200MM ARGB FANS – Two massive 200mm MF200R RGB fans draw high-volume airflow into the case for superior cooling (includes an additional 140mm fan at the back) – fully compatible with RGB-certified motherboards (ASUS Aura, Gigabyte Fusion, MSI Mystic Light, and ASRock) for comprehensive ARGB lighting.
BUILDER FOCUSED – A DIY or case modding dream, the front mesh intake panel, transparent top exhaust panel, and both side panels can be easily taken off – perfect for creative people looking to personalise their PC.
TEMPERED GLASS SIDE PANEL – The easy-to-remove light-grey tinted side panel combined with minimalist CPU cut out cover, PSU shroud, and clean cable management covers with dedicated routing creates a minimalist frame in which to showcase the hardware inside. Supports E-ATX* (*12″ x 10.7″ will limit cable management features) , ATX, Micro-ATX, and Mini-ITX motherboards – features 2 additional PCI slots at the rear to better highlight graphics cards.
LIQUID COOLING READY – The H500P accommodates liquid coolers with radiators up to 360mm in length either within the top panel or behind the front mesh.
ACCESSIBLE I/O PANEL – Features 2 x USB 3.2 (formerly USB 3.0) ports, 2 x USB 2.0 ports, 1 x 3.5mm audio jack, 1 x 3.5mm mic jack, ARGB Controller and 1 x 2-to-3 ARGB Splitter
Fully Mesh Front Panel
Dual 200 mm ARGB LED Fans
Cable Management & PSU Cover
Vertical GPU Support
360 mm Liquid Cooling Support
Tempered Glass Side Panel
ARGB Controller and 1-to-3 Splitter Cable Included
ELITE NEX WHITE W700 230V NEX POWER SUPPLY ; 80 Plus standard certified efficiency ; NON-MODULAR PSU ; Active PFC ; dual forward topology design ; 120MM FAN ; ATX 12V Ver. 2.41 – BLACK
PSU W700 230V 80 Plus NON-MODULAR
• Active PFC and a dual forward topology design
• Excellent temperature resistance
• High peak power tolerance expert zone
• Durability, reliability, and safety
• 80 Plus standard certified efficiency
Expert Specs
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
Esonic H610DA1 – Micro ATX Motherboard, 2* DDR4 UDIMM Slot 3200MHz, up to 64GB, FOR Intel H610 Chipset 12/13th Gen Processors LGA1700
EXPERT FEATURES
- Model NO. H610DA1
- Integrated Graphics/ Not Integrated Graphics
- Main Chipset Intel
- Maximum Memory Capacity 64G
- Structure Micro ATX
- Memory DDR4
- SATA Interface SATA3.0
- CPU Socket LGA1700
- Printed Circuit Board Four Layers
- Main Board Structure Integrated
- Audio Effects Not HiFi
- CPU Intel 12/13th Gen Processors
- Motherboard Size 22cm X 17.5cm
- LAN 1000m
- Memory Type 2* DDR4 Udimm Slot 3200MHz, up to 64GB
- Storage 3* SATA3.0 Port 6GB/S 1* M.2_SSD Support 2242/2280
Product Description
| Product name | Esonic H610 M.2 WIFI motherboard for desktop PC 12/13th gen with DP |
Product Description
| Product name | Esonic H610 M.2 WIFI motherboard for desktop PC 12/13th gen with DP |
| Brand | Esonic motherboard |
| Chipset | Intel® H610 Chipset |
| Processor Support |
Supports LGA1700 12/13th Gen Intel®Core TMi3/i5/i7/i9/
Pentium/Celeron series processors |
| Memory Support |
2* DDR4 UDIMM slot 3200MHz, up to 64GB
(For more information on compatible components, please check with manufacturer) |
| LAN |
1* RTL8111H 10/100/1000Mbps Ethernet
support Wake On LAN |
| Audio |
1* Realtek ALC897 high fidelity audio controller |
| Storage |
3* SATA3.0 port 6Gb/s
1* M.2_SSD support 2242/2280 NVMe/SATA SSD |
| USB |
2 * USB 3.2GEN2 port
2 * USB 3.2GEN1 port
5 * USB 2.0 port |
| SLOTS |
1* PCI Express X16 Gen 4.0 slot
1* PCI Express X1 Gen 3.0 slot |
| Back panel |
1*M.2_WIFI slot
2*USB3.2 Gen2x1 TYPE_A port
1*RJ45 port
2*USB2.0 port
1*Audio_jack (Line-in/Line-out/Mic-out)
1*KB_MS port
1*DP port
1*VGA(D_Sub)port
1*HDMI port
|
| On-Board Pinheaders / Connectors |
1* eSPI connector
1* USB 3.2 Gen 1x1 connector
∟ Support additional 2* USB port
2* USB 2.0 connector
∟ Support additional 3* USB port
1* CLR_CMOS connector
1* 4pin smart CPU_FAN connector
1* 24pin ATX power port
1* 8pin ATX 12V power port
1* M.2 switch connector
1* 4pin SYS_FAN connector
1* F_PANEL connector
1* F_AUDIO connector
1* COM connector
|
| Form Factor | ATX (22cm X 17.5cm) 6 mounting holes |
| Accessories | SATA data cable (optional) 1* I/O Backboard 1* User Manual 1* Drives installed CD |
Cooler Master MasterBox 520 PC Case – Mid-Tower ATX Chassis, 4x Pre-Installed Fans (Front & Rear), Multiple Airflow Configurations, Tempered Glass Front & Side Panel, ARGB Controller – White
Mid-Tower ATX Chassis Glass ARGB White
EXPERT SPECIFICATIONS
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
| EXPERT ZONE | ||
|
||
|