NCTS-NU6K16S
UPS NCTS ONLINE 6KVA 5.4KW 12V 7AH*16
NCTS NU6K16S 6KVA/4.8KW Online Pure Sine Wave Tower UPS, 0ms Transfer, 192V Internal 16×12V 7Ah Battery, 120–275VAC Input & Smart Monitoring
NCTS NU6K16S 6KVA/4.8KW Online Pure Sine Wave Tower UPS, 0ms Transfer, 192V Internal 16×12V 7Ah Battery, 120–275VAC Input & Smart Monitoring
488 $
EXPERT FEATURES
- 6KVA / 4.8KW Online UPS : Single-phase online UPS rated for 6KVA / 4.8KW output, designed for continuous protection of business, IT, networking and other critical electrical loads.
- Pure Sine Wave Output : Provides a sine-wave inverter output with THD below 3% on linear loads and below 8% on nonlinear loads.
- 0ms AC-to-Battery Transfer : Zero transfer time between AC and battery helps keep connected equipment powered without switching interruption.
- 0.8 Output Power Factor : Delivers up to 4.8KW real output power from its 6KVA capacity.
- Active Input PFC : The data sheet specifies active input power-factor correction with input power factor above 0.98.
- Wide Input Range : Supports a broad 120–275VAC input range and 45–55Hz input-frequency range for tougher grid conditions.
- Generator Compatible : NCTS specifically lists generator connectivity as a supported operating feature.
- Internal 192V Battery System : Uses sixteen internal 12V 7Ah batteries in a 192V battery group.
- Standard Backup Runtime : Rated for at least 10 minutes at half load and at least 5 minutes at full load under the stated standard configuration.
- Fast Battery Recovery : Standard charging reaches approximately 90% capacity in 5 hours.
- Bypass Overload Protection : At 105–125% overload, the unit transfers to bypass after 1 minute.
- Expandable Monitoring : RS232 communication can be converted to RS485, with dry-contact and smart-slot expansion supporting SNMP, SMS and other monitoring methods.
EXPERT SPECS
| Specification | Details |
|---|---|
| Brand | NCTS |
| Model | NU6K16S |
| Product Type | Online Pure Sine Wave Tower UPS |
| Input / Output Phase | Single-Phase Input and Output |
| Rated Output Capacity | 6KVA / 4.8KW |
| Rated Voltage | 220VAC |
| Input Voltage Range | 120–275VAC ±5 |
| Input Frequency Range | (45–55) ±0.5Hz |
| Bypass Voltage Range | 80VAC × (1±5%) to 285VAC × (1±5%) |
| Battery Group Voltage | 192V |
| Battery Method | Internal |
| Battery Configuration | 16 × 12V 7Ah |
| Backup Time | ≥10 Minutes Half Load / ≥5 Minutes Full Load (Standard) |
| Maximum Input Current at Power-On | <150% of Rated Current |
| Battery Charging Time | 5 Hours to 90% (Standard) |
| Output Voltage | 220VAC ±1% (Inverter Output) |
| Output Frequency | 50±5Hz When AC Input Is Normal / 50Hz ±1% When AC Input Is Abnormal |
| Waveform | Sine Wave |
| Waveform THD | <3% Linear Load / <8% Nonlinear Load |
| Output Power Factor | 0.8 |
| Overload Protection | 105–125% Load: Transfer to Bypass After 1 Minute |
| Output Current Peak Coefficient | 3:1 |
| AC-to-Battery Transfer Time | 0ms |
| Communication | RS232; Convertible to RS485; Dry Contact; Smart Slot |
| Monitoring Expansion | SNMP, SMS and Other Monitoring Methods via Smart Slot |
| Net Weight | 57kg |
| Gross Weight | 64kg |
| Unit Dimensions (W × H × D) | 515 × 250 × 620mm |
| Carton Dimensions (W × H × D) | 660 × 365 × 730mm |
| GTIN | 6295151551127 |
