PCI & PCIE EXPRESS CARD TO 4 PORT USB 3.0
PCIE-USB3.0-CARD
PCI & PCIE EXPRESS CARD TO 4 PORT USB 3.0
- This High-Performance card adds four USB 3.0 downstream ports to your PC allowing the consumers to get the most out of the technology by expanding the utility of PC systems. The super-speed USB port makes transferring HD video files, digital photos and backing up hard drives quick and easy.
- Supports USB legacy Function with the following speed rates:
- Low speed (1.5 Mbps)
- Full Speed (12 Mbps)
- High speed (480 Mbps)
- SuperSpeed (5 Gbps)
- The actual transmission speed is limited by the setting of the device connected.
- Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices.
PCIe Riser Mining Card,Awakingdemi NGFF M.2 to USB 3.0
- he main control board uses the direct power supply mode of PCI-E interface, and does not need to connect the power line again
- The card slot is imported to ensure a better connection.
- A high quality connector is used for the card slot to make the card contact well.
- Multi layer shielded wire for PCI-E connector.
- The PCI-E connector is relatively wear-resistant and increases electrical conductivity.
Quad-Port 2.5GBase-T PCIe Network Adapter RTL8125B 2500/1000/100Mbps PCI Express Gigabit Ethernet Card RJ45 LAN Controller Support PXE for Windows/Linux/MAC with Low Profile
Quad-Port 2.5GBase-T PCIe Network Adapter
EXPERT FEATURES
- The Realtek RTL8125 chipset, compliant with IEEE 802.3az and IEEE 802.3u supports the PCIe 2.1 interface. It provides up to a 250% increase in data rate and requires no changes to existing cable infrastructure.
- Compatible with the IEEE 802.3u specification for 10/100Mbps Ethernet, the IEEE 802.3ab specification for 1000Mbps Ethernet and the IEEE 802.3bz specification for 2500Mbps Ethernet. It supports an auxiliary power auto-detect function and will auto-configure related bits of the PCI power management registers in PCI configuration space.
- This Quad port 2.5Gbps PCIe network card adds four copper Ethernet port to your Server or Desktop computer and provides Multi-Gigabit Ethernet access to your network at four speeds: 2.5bps, 1G, 100Mbps and 10Mbps.
- Support Wake-On-LAN and RealWow Technology (remote wake-up), remotely power on/off your computer with WOL, good for centralized management
- It is also available via CAT5e UTP cable or CAT3 UTP (10Mbps only) cable to provide high speed transmission. It is suitable for multiple market segments and emerging applications, such as desktops, workstations, servers, communication platforms and embedded applications
TP-Link AC1300 PCIe WiFi PCIe Card (Archer T6E) – 2.4G/5G Dual Band Wireless PCI Express Adapter, Low Profile, Long Range, Heat Sink Technology, Supports Windows 10/8.1/8/7/XP
2.4G/5G Dual Band PCIe WiFi Card
EXPERT FEATURES & SPECS
| Brand | TP-Link |
|---|---|
| Model | Archer T6E |
| Part Number | Archer T6E |
| Color | Black |
|---|---|
| Standards | IEEE 802.11ac/n/a 5 GHz, IEEE 802.11b/g/n 2.4 GHz |
| Wireless Data Rates | 867 Mbps at 5 GHz, 400 Mbps at 2.4 GHz |
| Security | Support 64 / 128-bit WEP, WPA-PSK / WPA2-PSK, 802.1x |
| Interface | PCI Express |
| Frequency Band | 2.4 GHz / 5 GHz |
| Modulation | DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM |
| Transmitted Power | 5 GHz: <23 dBm (EIRP) 2.4 GHz: <20 dBm (EIRP) |
| Antenna | 2 x Dual Band Detachable Antennas |
| System Requirements | Windows 10 (32 / 64-bit), Windows 8.1 (32 / 64-bit), Windows 8 (32 / 64-bit), Windows 7 (32 / 64-bit), Windows XP (32 / 64-bit) |
| Features |
|
|---|
| Dimensions | 0.85" x 4.80" x 4.50" |
|---|
TPLINK TX401 10 GIGABIT PCIE NETWORK ADAPTER
TX401
- 10 Gbps Networking - Combined with the latest 10GBase-T Technology, TX401 delivers extreme speeds of up to 10 Gbps, which is 10× faster than typical Gigabit adapters, guaranteeing smooth data transmissions for both internet access and local data transmissions.†
- Versatile Compatibility - With extreme speed and ultra-low latency, 10GBase-T is backwards compatible with Fast Ethernet and Gigabit Ethernet, automatically negotiating between higher and lower speed connections.
- CAT6A Ethernet Cable - To maximize TX401's performance, a 1.5 m CAT6A Ethernet Cable is included—rated for up to 10 Gbps while a regular cable is only rated for 1 Gbps.
- Low-Profile and Full-Height Brackets - In addition to the standard bracket, a low-profile bracket is provided for mini tower computer cases. Customized options give you the flexibility to find a bracket that perfectly fits your board design.
| Interface | 1× PCI Express 3.0 x4, 1× RJ45 Gigabit/Megabit Port |
|---|---|
| Network Media | 10GBASE-T/5GBASE-T/2.5GBASE-T/1000BASE-T/100BASE-TX |
| LED | 10 Gbps Link/Act, 5 / 2.5 / 1 Gbps and 100 Mbps Link/Act |
| Data Rates | 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, 10 Gbps for Half-Duplex mode, 200 Mbps, 2 Gbps, 5 Gbps, 10 Gbps, 20 Gbps for Full-Duplex mode |
| Dimensions | 120.8 × 98.2 × 21.5 mm (4.8 × 3.9 × 0.8 in) |
| Flow Control | 802.3x |
| OTHERS | |
|---|---|
| Certification | FCC, CE, RoHS |
| Package Contents | 10 Gigabit PCIe Network Adapter (TX401) Standard/Low-Profile Brackets Quick Installation Guide Resource CD 1.5 m CAT6A Ethernet Cable |
| System Requirements | Windows 11/10/8.1/8/7, Windows Servers 2019/2016/ 2012 R2, Linux |
TXA074 AQC107 10 Gigabit Single Electrical Port
TXA074 AQC107 10 Gigabit Single Electrical Port Network Card,PCI-E Network Card Server Desktop Network Card Single-Port Thickened Electrum 2.5G / 5G / 10G
roduct description
Specification:
Item Type: PCIE network card
Type: AQC107 10G single-port SFP+ server fiber network card
Product Model: TXA074 AQC107 10 Gigabit single electrical port network card
Product Type: Desktop network card
Chip: AQC 107
Applicable Network Type: 10 Gigabit Ethernet
Transmission Rate: 10G/5G/2.5G/1G
Bus Type: PCI-EX 4
Network Standards: IEEE 802.3u100BASE-TX, IEEE 802.3ab1000BASE-T, IEEE 802.3an 10GBASET-T, IEEE 802.1QVLANs, IEEE 802.3x FlowControl, IEEE 802.1PPrlorityQuouing, IEEE 802.3azEEE
Network Cable Interface Type: RJ45
Whole Duplex / Half Duplex: Whole duplex/half duplex adaptive
LED Indicator: LINK/ACT (connection work)
Size: Approx. 55 x 130mm / 2.2 x 5.1in
