HIGH DEFINITION MULTIMEDIA INTERFACE / HDMI KVM OVER IP EXTENDER WITH 2 PORTS USB / TRANSMITTER & RECEIVER
Product Introduction
1. Modular design to assemble for Extender, Splitter,
Matrix and Switcher for up to 1x256 (N TO 1 is not
supported) applications.
2. Extends 4K 30P, 1080 60P HDMI signal up to 180m
(600ft) over a single Cat5E cable, 100M Ethernet.
3. Use conventional Ethernet Switch for extension and
distribution, and can be cascaded by the Ethernet
switches for longer distance.
4. Supports IR (20KHz~60KHz) extension.
5. Supports Stereo Audio over IP, independent to HDMI
extension.
6. Supports USB (Keyboard, Mouse) extension over IP and
KVM switch function by button selection.
7. Supports EDID pass-through and Transmitter
resolution pass-through, including most
popular 16:9, 16:10, 4:3 resolution and timing (Support
list please refer to appendix).
8. Supports Graphic/ Video mode selection and the
latency is between 0.06-0.10 seconds.
9.Power supply is 5V2A with TYPE-C port.
10.The shell is made of aluminum alloy with fixed holes
for easy installation.
Note: N TO N mode means that multiple TXs are
connected to multiple RXs through the Ethernet switch.
Turn to SP and press the ID to pair the IDs. The indicator
light of the same group should be the same and different
from that of other groups
Note: USB KVM supports only mouse and keyboard.
Other USB devices are not supported.
Accessories INCLUDED IN THE BOX :
- 1pair of HDMI extender
- Power Adapter 5V/2A x 2,
- IR TX Cable x 2,
- IR RX Cable x 2,
- USB2.0 male to male cable x 1,
- User Manual X1,
Appearance size:
Length* Width * Height: 139*54*24(mm)
Weight: 137g (for 1pc)
Note: Please use the original power supply of the product. If
the signal is weak or intermittently interrupted, the network
cable length may exceed the required range. If the mouse
and keyboard are stuck, power it on again.
