Description
10800mAh UPS Uninterruptible Power Supply Mini UPS 9/12V OUTPUT – Battery Backup for WiFi Camera Router LED Light Modems Speaker
Power Supply Mini UPS
$ 14
Power Supply Mini UPS
10800mAh UPS Uninterruptible Power Supply Mini UPS 9/12V OUTPUT – Battery Backup for WiFi Camera Router LED Light Modems Speaker
Power Supply Mini UPS
VEIKK , A50 , DRAWING , TABLET , 10 | {attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
---|
Capacity | 650VA |
Dimension (mm) | 286 x 96 x 138 (D x W x H) |
Weight (kg) | 4.3 |
Voltage Range | 162 ~ 290VAC (Single boost) 140 ~ 300VAC (Double boost) |
Frequency | 50Hz/60Hz (Auto-sensing) |
Phase | Single + GND |
Voltage Range | 220-240VAC |
Battery Mode | 220-240VAC |
Frequency | 50Hz ±1% (Battery mode) |
Waveform | Simulated sine wave (Battery mode) Sine wave (AC mode) |
Transfer Time | 2ms typical |
Type | 12V/8.2AH x 1 |
Backup Time | 8 - 20 mins depending on load |
Recharge Time | 2-4 hours recover to 90% capacity |
Interface | RS232, USB port, RJ45/RJ11 (Optional) |
Display | LED/LCD Optional |
Alarm | Batt. Mode, low battery, overload, fault, etc. |
Short Circuit Protection | Yes (Line mode & battery mode) |
Surge Protection | Yes |
Alarm | Audible & Visual |
Overload Protection | Line mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediatelyBattery mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediately |
Intelligent Battery | Prevent overcharging of battery |
Management | Protect battery and prolong battery life |
1. AC Mode Indicator Green LED Lighting 2. Battery Mode Indicator Battery Normal : Yellow LED Lighting and Blinking every 30s Battery Low : Yellow LED Lighting and Blinking every 2s 3. Overload and Fault Indicator Overload : Red LED Blinking every 2s Fault : Red LED Lighting 4. Power Switch 5. Power AC Input 6. Backup Outlets |
Input | Rating | 1500VA | |
Voltage | 220/230/240 VAC, 1Ø2Wires | ||
Voltage Range | 162-290VAC | ||
Frequency | 50 or 60 Hz +/-10% (auto sensing) | ||
OuTput | Active Power | 600W | |
Voltage (backup mode) | 220/230/240VAC+/-1% | ||
Frequency (backup mode) | 50 or 60 Hz +/-1% | ||
Waveform | Simulated Sine Wave | ||
Transfer time | Typical 2 to 6 ms | ||
Protection | Full Protection | Overload, discharge, and overcharge protection | |
LED Indicators | AC Mode | Green lighting | |
Battery Mode | Green flashing | ||
Alarm | Battery Mode | Sounding every 10 seconds | |
Low Battery | Sounding every second | ||
Overload | Sounding every 0.5 second | ||
Fault | Continuously sounding | ||
Battery | Battery Type & Number | SLA 12V/7AH x 2 | |
Typical Recharge Time | 4~6 hours (to 90% full capacity) | ||
Backup time | 10~20min depending on load level |
Model | STE2000 | ||||
Capacity | 2000VA/700W | ||||
INPUT | |||||
Voltage | 110/120 VAC or 220/230/240 VAC | ||||
Voltage Range | 81-145VAC or 162-290VAC | ||||
Frequency Range | 60/50 Hz (Auto sensing) | ||||
OUTPUT Voltage | 110/120 VAC or 220/230/240 VAC | ||||
AC Voltage Ragulation (Bat Mode) | ±10% | ||||
Frequency Range (Bat Mode) | 60Hz or 50Hz ± 1Hz | ||||
Transfer time | Typical 2-6ms | ||||
Waveform (Bat Mode) | Simulated Sinewave | ||||
Battery | |||||
Battery Type&Number | 12V 9Ah*2 | ||||
Charging ability | 4-6 hours recover to 90% capacity | ||||
Protection | |||||
Full protection | Overload, discharge and overcharge protection | ||||
INDICATIONS | |||||
LCD Display | AC/Battery Mode, Load/Battery Level, Input /Output Voltage ,Overload, Fault, and low Battery | ||||
LED Display | AC Mode | Green lighting | The right green LED lighting& the 2nd to 5th green LEDs gradually lighting indicating load level | ||
Battery Mode | Yellow flashing | The right green LED flashing& the 2nd to 5th green gradually lighting indicating battery capacity | |||
Fault | Red lighting | ||||
Battery mode | Sounding every 10 seconds | ||||
Low battery | Sounding every second | ||||
Overload | Sounding every 0.5 seconds | ||||
Battery Replacement Alarm | Sounding every 2 seconds | ||||
Fault | Continuously sounding | ||||
Dimension, D*W*H(mm) | 370*135*165 | ||||
Net Weight (kgs) | 11.5 | ||||
Environment | |||||
Humidity | 0-90% Relative Humidity 0-40 ℃ (Non-condensing) | ||||
Noisy Level | Less than 40dB |
MODEL | ST1500 |
Capacity | 1500VA/500W |
INPUT | |
Voltage | 110/120 VAC or 220/230/240 VAC |
Voltage Range | 81-145 VAC or 140-300 VAC |
Frequency Range | 60/50Hz (Auto sensing) |
OUTPUT | |
Voltage | 110/120 VAC or 220/230/240 VAC |
AC Voltage Regulation(Bat Mode) | ±10% |
Frequency Range(Bat Mode) | 60Hz or 50Hz ± 1Hz |
Transfer Time | Typical 2-6ms |
Waveform(Bat Mode) | Simulated sine wave |
BATTERY | |
Battery Type & Number | 12V 7Ah*2 |
Charging Ability | 4-6 hours recover to 90% capacity |
PROTECTION | |
Full Protection | Short circuit ,Overload, Battery discharge and overcharge, Surge protection |
INDICATIONS | |
AC Mode | Green lighting |
Battery Mode | Yellow flashing |
Fault | Red lighting |
Battery Mode | Sounding every 10 seconds |
Low Battery | Sounding every second |
Overload | Sounding every 0.5 seconds |
Battery Replacement Alarm | Sounding every 2 seconds |
Fault | Continuously sounding |
Dimension | 370*135*165mm |
Net Weight | 10.5KG |
ENVIRONMENT | |
Humidity | 0-90% Relative Humidity 0-40°C (Non-condensing) |
Noise Level | Less than 40dB |
Valve Regulated Acid Battery - Voltage: 12V - Ampere Hour 9AH | Capacity range: 1.2-28 (25°C) | Voltage class: 12v | Low self-discharge rate: ≤2%/month (25°C) | Long design life: floating life is 5 years (25°C) | High sealed reaction efficiency≥98% | Acclimation temperature range: -15~50°C | Operation temperature range: -20~50°C | Recommended operation temperature 25°C |
No account yet?
Create an AccountWhatsApp us