NCTS-INSF071
NCTS SFTP CAT7 0.57CCA 305M NETWORK CABLE INDOOR
NCTS CAT7 S/FTP Indoor Network Cable – 23AWG Solid (Copper-Clad Aluminum), 4-Pair Shielded, 500MHz, 100Ω, CM/CMR Grey PVC Structured Cabling, 64* 0.12AI Braiding Cover | NCTS-INSF071
Generate an AI Image
- Layout
- Create a clean website product-profile composition for the NCTS-INSF071 CAT7 S/FTP 23AWG CCA Indoor Network Cable.
- Final image must be exactly 2048 × 2048 pixels, perfect 1:1 square ratio.
- Make the actual grey cable coil plus one enlarged technical cutaway the overwhelmingly dominant foreground hero, occupying approximately 64–68% of the canvas.
- Show a dramatic three-quarter macro view with a clean exposed construction revealing exactly four twisted pairs / eight insulated conductors, individual pair shielding, the overall braid, insulation layers, and grey PVC jacket.
- Maintain clear foreground, midground, and background separation.
- Keep every cable edge, NCTS logo, title, cutaway, and icon fully inside generous safe margins.
- No pedestal, stage, conventional poster, vertical banner, or cropped preview.
- Product Presentation
- Use the official NCTS-INSF071 datasheet and cable cross-section as the strict physical reference.
- Preserve the authentic grey PVC jacket, 6.7mm overall-diameter character, four-pair structure, CCA conductor construction, individual pair shields, and outer braided shield.
- Place the NCTS logo at top-left.
- Center “CAT7 S/FTP 23AWG CCA Cable” at the top in sophisticated 3D extruded pearlescent-metal typography.
- The cutaway must look technically believable and immediately communicate the shielding architecture.
- Artistically Distinct and Detailed Background
- Create a surreal “Protected Signal Tunnel” showing four synchronized data streams travelling through separate luminous channels.
- Wrap each channel in a thin translucent shielding membrane, then surround all four with one larger woven metallic energy lattice representing the overall braid.
- Outside this protected zone, show abstract distorted electromagnetic waves and crosstalk patterns striking the shield and bending away before reaching the signals.
- Keep the concept firmly about signal integrity, shielding, and structured networking—no animals, characters, fantasy creatures, or unrelated gaming imagery.
- Maintain approximately 85–90% extreme high-luster pearlescent white across the environment.
- Use only opalescent high-gloss sculptural textures and deep transparent oily-iridescent signal-fluid textures.
- Introduce restrained icy cyan, copper-orange, silver, and violet refractions around the cutaway.
- Icons — Bullet Listed
- CAT7
- S/FTP
- 23AWG
- CCA
- 500MHz
- 100Ω
- 4 PAIRS
- CM / CMR
- Render each icon as a different hollow 3D networking-tech freeform insignia whose geometry reflects its specific meaning.
- Use large, bold, ultra-readable typography suitable for thumbnail viewing.
- CRITICAL DIRECTIVE [STRICT] The Icons MUST Have different shapes depending on the specific content of the icon
- Output Requirements
- Final image must remain exactly 2048 × 2048 pixels, perfect 1:1.
- Add “Infographics Designed by the Expert Zone Team” in super-small discreet typography at the bottom.
- Constraints
- Depict specifically NCTS-INSF071.
- Exactly four twisted pairs only — never five pairs, never extra conductors.
- Represent eight insulated conductors total.
- This model uses CCA conductors; do not depict or label it as pure copper or solid copper material.
- “Solid” may only refer to the conductor structure.
- Do not invent CAT7A, CAT8, LSZH, PoE wattage, 10Gbps claims, RJ45 connectors, or unspecified formal standards.
- Never use graphite smog.
- Before finalizing, ask “How does this image fare as a product-profile image?” and automatically correct wrong pair count, wrong conductor material, inaccurate shielding layers, weak product dominance, or unreadable icons.
