Additional information
VEIKK , A50 , DRAWING , TABLET , 10 | {attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
---|
$ 72
PCE-M8-1500
Input | Rating | 1500VA | |
Voltage | 220/230/240 VAC, 1Ø2Wires | ||
Voltage Range | 162-290VAC | ||
Frequency | 50 or 60 Hz +/-10% (auto sensing) | ||
OuTput | Active Power | 600W | |
Voltage (backup mode) | 220/230/240VAC+/-1% | ||
Frequency (backup mode) | 50 or 60 Hz +/-1% | ||
Waveform | Simulated Sine Wave | ||
Transfer time | Typical 2 to 6 ms | ||
Protection | Full Protection | Overload, discharge, and overcharge protection | |
LED Indicators | AC Mode | Green lighting | |
Battery Mode | Green flashing | ||
Alarm | Battery Mode | Sounding every 10 seconds | |
Low Battery | Sounding every second | ||
Overload | Sounding every 0.5 second | ||
Fault | Continuously sounding | ||
Battery | Battery Type & Number | SLA 12V/7AH x 2 | |
Typical Recharge Time | 4~6 hours (to 90% full capacity) | ||
Backup time | 10~20min depending on load level |
VEIKK , A50 , DRAWING , TABLET , 10 | {attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
---|
Model | ST3000 | ||||
Capacity | 3000VA/800W | ||||
INPUT | |||||
Voltage | 110/120 VAC or 220/230/240 VAC | ||||
Voltage Range | 81-145VAC or 162-290VAC | ||||
Frequency Range | 60/50 Hz (Auto sensing) | ||||
OUTPUT Voltage | 110/120 VAC or 220/230/240 VAC | ||||
AC Voltage Ragulation (Bat Mode) | ±10% | ||||
Frequency Range (Bat Mode) | 60Hz or 50Hz ± 1Hz | ||||
Transfer time | Typical 2-6ms | ||||
Waveform (Bat Mode) | Simulated Sinewave | ||||
Battery | |||||
Battery Type&Number | 12V 9Ah*2 | ||||
Charging ability | 4-6 hours recover to 90% capacity | ||||
Protection | |||||
Full protection | Overload, discharge, and overcharge protection | ||||
INDICATIONS | |||||
LCD Display | AC/Battery Mode, Load/Battery Level, Input / Output Voltage ,Overload ,Fault , and low Battery | ||||
LED Display | AC Mode | Green lighting | The right green LED lighting &t he 2nd to 5th green LEDs gradually lighting indicating load level | ||
Battery Mode | Yellow flashing | The right green LED flashing & the 2nd to 5th green gradually lighting indicating battery capacity | |||
Fault | Red lighting | ||||
Battery mode | Sounding every 10 seconds | ||||
Low battery | Sounding every second | ||||
Overload | Sounding every 0.5 seconds | ||||
Battery Replacement Alarm | Sounding every 2 seconds | ||||
Fault | Continuously sounding | ||||
Dimension,D*W*H(mm) |
466 x 138 x 166 |
||||
Net Weight (kgs) | 19 | ||||
Environment | |||||
Humidity | 0-90% Relative Humidity 0-40 ℃ (Non-condensing) | ||||
Noisy Level | Less than 40dB |
Valve Regulated Acid Battery - Voltage: 12V - Ampere Hour 9AH | Capacity range: 1.2-28 (25°C) | Voltage class: 12v | Low self-discharge rate: ≤2%/month (25°C) | Long design life: floating life is 5 years (25°C) | High sealed reaction efficiency≥98% | Acclimation temperature range: -15~50°C | Operation temperature range: -20~50°C | Recommended operation temperature 25°C |
Capacity | 1000VA/450wW | ||||
Materials | Plastic | ||||
INPUT | |||||
Voltage | 220/230VAC | ||||
Voltage Range | VAC or 145-295VAC | ||||
Frequency Range | 60/50 Hz (Auto sensing) | ||||
OUTPUT Voltage | 220/230VAC | ||||
AC Voltage Ragulation (Bat Mode) | ±10% | ||||
Frequency Range (Bat Mode) | 60Hz or 50Hz ± 1Hz | ||||
Transfer time | Typical 2-6ms | ||||
Waveform (Bat Mode) | Simulated Sinewave | ||||
Power factor | 0.6 | ||||
Battery | |||||
Battery Type&Number | 12V 7Ah*1 | ||||
Floating Charging Voltage | 13.7VDC | ||||
Charging ability | 4-6 hours recover to 90% capacity | ||||
Protection | |||||
Full protection | Overload, discharge,and overcharger protection, short circuit protection | ||||
Cold start | YES | ||||
Offline charging | YES | ||||
Led Indications | |||||
Line mode | Green lighting | ||||
Battery mode | Flashing every 4 seconds | ||||
Charging | |||||
Fault | Green lighting | ||||
Sound Alarm | |||||
Battery mode | Sound every 4 seconds | ||||
Low battery | Sound every 1 second | ||||
Fault | keep sounding | ||||
Dimension,D*W*H(mm) | 280x100x140 | ||||
Net Weight (kgs) | 3.5 | ||||
Environment | |||||
Humidity | 0-90% Relative Humidity 0-45 ℃ (Non-condending) | ||||
Noisy Level | Less than 40dB | ||||
Remarks | |||||
Weight per box | 3.9 | ||||
box size | 325*140*220mm | ||||
Qt'y per marster carton | 4 pcs | ||||
Marster Carton Size | 335*300*460 | ||||
NW/kgs | 14 | ||||
GW/kgs | 14.7 |
Smart UPS On-Line SRV 6000VA / 6KVA
Specification |
Single Phase In & Out | |
Rated output capacity |
6KVA/4.8KW | |
Rated |
Rated voltage |
220VAC |
AC input |
Input voltage range |
120-275VAC±5 |
Inputfrequency range |
(45-55)±0.5Hz | |
bypass voltage |
80VACx(1±5%)-285VACx(1±5%) | |
Battery Input |
battery group voltage |
192V |
battery method |
Internal | |
Battery capacity & quantity |
12V 7ah X16 PCS | |
backup time(half/full) |
half load≥10 minutes,full load≥5minutes(standard) | |
maximum input current when power on |
<150% of rated current | |
batterychargingtime |
5hours can charge to 90%(standard) | |
AC output |
Outputvoltage |
220VAC±1%(invert output) |
Output frequency |
50±5Hz(when AC input is normal) 50Hz±1% (when ac inout is abnormal ) | |
wave form |
sine wave THD<3%( linear load) sine waveTHD<8%(Nonlinear load) | |
output power factor |
0.8 | |
Overload Protection |
105-125% ,Transfer to Bypass after 1 Min | |
Output current peak coefficient |
03:01 | |
Transfer time between AC and Battery |
0ms | |
Communication and monitoring functions |
RS232(can transfer to 485,Dry node,Smart slot(can expand to SNMP,SMS and other monitoring methods) | |
Tower |
N.W(KG) |
57 |
G.W(KG) |
64 | |
Unit Size(W X H X D)mm |
515*250*620 | |
Carton Size(W X H X D)mm |
660*365*730 |
Model | STE2000 | ||||
Capacity | 2000VA/700W | ||||
INPUT | |||||
Voltage | 110/120 VAC or 220/230/240 VAC | ||||
Voltage Range | 81-145VAC or 162-290VAC | ||||
Frequency Range | 60/50 Hz (Auto sensing) | ||||
OUTPUT Voltage | 110/120 VAC or 220/230/240 VAC | ||||
AC Voltage Ragulation (Bat Mode) | ±10% | ||||
Frequency Range (Bat Mode) | 60Hz or 50Hz ± 1Hz | ||||
Transfer time | Typical 2-6ms | ||||
Waveform (Bat Mode) | Simulated Sinewave | ||||
Battery | |||||
Battery Type&Number | 12V 9Ah*2 | ||||
Charging ability | 4-6 hours recover to 90% capacity | ||||
Protection | |||||
Full protection | Overload, discharge and overcharge protection | ||||
INDICATIONS | |||||
LCD Display | AC/Battery Mode, Load/Battery Level, Input /Output Voltage ,Overload, Fault, and low Battery | ||||
LED Display | AC Mode | Green lighting | The right green LED lighting& the 2nd to 5th green LEDs gradually lighting indicating load level | ||
Battery Mode | Yellow flashing | The right green LED flashing& the 2nd to 5th green gradually lighting indicating battery capacity | |||
Fault | Red lighting | ||||
Battery mode | Sounding every 10 seconds | ||||
Low battery | Sounding every second | ||||
Overload | Sounding every 0.5 seconds | ||||
Battery Replacement Alarm | Sounding every 2 seconds | ||||
Fault | Continuously sounding | ||||
Dimension, D*W*H(mm) | 370*135*165 | ||||
Net Weight (kgs) | 11.5 | ||||
Environment | |||||
Humidity | 0-90% Relative Humidity 0-40 ℃ (Non-condensing) | ||||
Noisy Level | Less than 40dB |
No account yet?
Create an AccountWhatsApp us